Learning How to Weld

It’s possible to start learning welding using simple tips and tricks. Although there are a lot of skills that go into this, it doesn’t take a lot of time for you to learn and get better gradually.

We have a few simple tips for you that will help you become an experienced house repairs.

Getting Ready

Before you decide to start, it’s important to try out a few things. First, hold the gun so you can practice. One hand needs to be at the base of the gun to provide the stability needed for accurate works while the other hand will be on the trigger. Try to move the gun steadily over a metal surface as if you are actually welding. Once the gun feels natural on the hands, pull it close to a weld surface, press the trigger, and touch the surface lightly for your very first welding test. You will always need to test the gun every time you are starting any job.

Prepare the Metal

Because welding involves working with metal, if you are going to become a reliable handyman services then you cannot afford to ignore metal preparation and handling techniques. You need to get all the right tools first. A carbide scribe or a woodworker’s awl is needed to make marks on the metal surface. You will also need a metal cutting chop. As a pro tip to use, when you cut the metal, slightly bevel the edges. This will make them stronger once welding is done. You will also need a clamp to position the cut metal pieces before welding. Once everything is in position, go ahead and begin tacking. Since this will be your first time doing welding, sometimes the metals in position may shift or disassemble when you are tacking. Just reposition them and keep trying until you get it right.

Finish Weld

As soon as you have finished with the tacking process, you need to now smooth out the edges and all the areas you have worked on. Grinding the edges is one of the most enjoyable steps in welding. However, you need to be careful not to overdo it. Grinding off too much might actually affect the structural strength of the item you have just created. Once the edges are smoothed out, you are done.

Painting

You can decide to paint the metal or leave it like that. It all depends on what you are creating. However, metal is a multipurpose material and there are many paints that can go with it. A coating of clear acrylic is however highly recommended by many welders. You can use a spray bottle to apply it smoothly on the metal surface.

Welding is simple if you are ready to learn about it. The simple tips above should help you get the basics right. In the end, with regular practice you will soon be among the good handyman capable of handling different kinds of tasks.